-
Power
-
Engine
BGPW 30 ST-380/220V
Three-phase open generator set from our Emergency Balance range, with an automatic, manual, by signal or test operating mode.
It includes a high-resistance galvanized steel bench and is specially designed for emergency applications in various areas, such as industry, residential, educational centers or public spaces.
-
Dimensions (mm)L1795W950H1252
-
Weight (Kg)800
-
Fuel tank (l)95
-
Voltage380/220 V
-
Frequency60 Hz
-
1800r.p.m
-
Water cooled
-
FuelDiesel
-
VersionOpen
-
CE Conformity
Technical specifications
General technical data | Engine | PERKINS 404D-22TAG |
---|---|---|
Alternator | STAMFORD PI144G | |
Performance class | G2 | |
Frequency | 60 Hz | |
Voltage | 380/220 V | |
Control card | DSE 6020 MKII CONTROL CARD | |
Fuel tank (l) | 95 |
Power | ESP Power (kVA / KW) | 39 / 32 |
---|---|---|
PRP Power (kVA / KW) | 36 / 29 |
Standard equipment
DSE 6020 MKII CONTROL CARD
DSE 6020 MKII control card, with mains grid monitor. The genset will automatically start up when detecting a fault in the electric power network and it will turn off automatically as well, when the electrical supply is re-established.
It can also work in manual mode and by signal. It allows you to monitor a wide range of generator parameters and display information alerts, status and alarms.
The module includes USB communication ports, 4 configurable digital inputs, 3 analog inputs, 6 configurable outputs, emergency stop button and 8-35 V battery charger.
It has 132x64p illuminated LCD display with 4 lines of text, 5-key navigation through menus, programmable clocks and alarms, reading and displaying parameter values, including RMS values.
The entire module is easily configurable via PC using the DSE specific software configuration.
Different operating modes are available: automatic mode, manual mode, signal mode and test mode.
Other alternative configurations are available upon request to extend the capabilities of the operation modes.
Readings allowed by the control card
The genset response to a fully configurable alarm is available via DSE 6020 software.
Would you like more information about the control card? Deep Sea Electronics DSE 6020 MKII technical datasheet