DGI 110 ST
Industrial range three-phase open generator, operating in automatic mode, manual mode, signal mode, or test mode. A commitment to quality energy.
Power (PRP / ESP):
99 / 108 kVA (79 / 86 kW)
VERSION:
Open
VOLTAGE:
400/230V
EMISSIONS LEVEL: EU Stage II
CE DECLARATION OF CONFORMITY
Other product versions
DGI 110 ST
DGI 110 ST
DGI 110 ST
DGI 110 ST
DGI 110 ST
DGI 110 ST
PRODUCT DETAILS
VERSION
Open
Fuel
Diesel
Voltage
400/230V
Rpm
1500
Phase
3
Version
Open
L (mm)
2100
W (mm)
940
H (mm)
1734
Weight (Kg)
1200
Type of regulation
Mechanical
Refrigeration
Water-cooled
Emissions
EU Stage II
Consumption 75%
16,2 l/h
Consumption 100%
16,2 l/h
Tank size (l)
330 l
Autonomy 50% PRP
30 h
Autonomy 75% PRP
20,4 h
Autonomy 100% PRP
15 h
Alternator model
STAMFORD UCI274C
Type of alternator regulation
AS440
Switch model
Schneider EasyPact 160A 4P
Amps ESP (A)
155,9
Switchboard model
155,9
DGI 110 ST
Spectrum
| 50Hz
Do you need a switchboard for your installation?
SWITCHES BY CONTACTS
Switching panels between mains and genset with Schneider Electric contactors and enclosure from the same manufacturer. With mechanical and electrical interlocking and switching management from the control panel. They have an optional mains failure detector.
MOTORISED SWITCHES
Fully apparent cutoff 4-pole remote operated transfer switches. They permit the on-load transfer of two three-phase sources via de-energised remote contacts from an external automatic controller using pulse logic or a switch.
They are designed for use on low voltage power systems where a brief interruption of power to the load during transfer is acceptable.
Do you want more information about this generator? Fill in the form
* Remember to fill out all required fields